DESCRIPTION The chain coupling GC consists of two steel sprockets, machined and connected by a double chain. The manufacture of the coupling completely in steel allows to use at high temperatures and reduce the loss of power between the driving and driven. Up to 8000 Nm of torque and maximum bore 110 mm. Chain Coupling…
DESCRIPTION The GF coupling, even if being built simply, assures a high elastic reliability which allows the recovery of high angular misalignments (up to 5°), absolutely reducing the drive irregularities. It is composed of two hubs in steel UNI EN10083/98 fully turned and by an elastomeric central ring connected with screws and bolts in alternate…
DESCRIPTION The GD coupling is composed of two hubs in steel UNI EN 10083/98 fully turned, externally toothed with rounded profile and assembled only with a sleeve in polyamide stabilized resin, toothed internally. Due to the tooth profile with which the hubs and the sleeve are connected, you can obtain a high contact surface also…
DESCRIPTION The GEC coupling is composed of two hubs in steel UNI EN10083/98 fully turned. These two hubs are connected by radial pins, made in steel with high resistanceand seated within the elastomeric elements. These pins, with their relevant elastomeric elements, are protected by an external band, allowing the coupling a high grade of protection.…
DESCRIPTION The coupling GAS is an elastomeric coupling with compact dimensions composed of two hubs made in steel UNI EN10083/98, fully turned with one elastomer. The hub’s tooth profile is designed to allow the elastomeric element to work only by compression and not in shear, allowing for long life of the coupling in high reversal or load…
DESCRIPTION The GSF bellow couplings have been designed and manufactured for all applications requiring excellent dynamic characteristics, necessary for high speeds, fast reversing and, at the same time, torsional rigidity with low inertia without compromising the high reliability. The coupling is made in three different and modular elements, in order to obtain high flexibility in assembling…
DESCRIPTION GRI rigid couplings have been designed and manufactured to connect two shafts of the same diameter but without allowing any relevant misalignment. The coupling is manufactured in one element for the single split version. A two piece unit is available on request allowing simple and fast mounting and dismounting. Up to 790 Nm of torque and…
DESCRIPTION Designed to suit applications where high reliability, precision and an optimum weight/power ratio is required; ideally suited for applications with high speeds and power, also offering low overhung loads when using the spacer version. This coupling is composed of three main items: the two fully turned hubs, made in steel UNI EN10083/98 and the…
Saremo chiusi dal 24-12-22 al 8-1-23 compresi.
Nei giorni 27-28-29 Dicembre e 3-4-5 Gennaio aperti gli uffici (no spedizioni).
Our company will be closed from 24-12-22 to 8-1-23 included.
On 27-28-29 December and on 3-4-5 January open only office service (no expedition).
Non visualizzare più questo messaggio - Never see this message again
